BAS 130

BAS 130

Equipment for foam concrete (CLC) BAS 130 is designed to prepare a uniform foam concrete mass by mechanically whipping the cement-sand mixture and foam (depending on the formulation) followed by pneumatic unloading along the concrete pipe to the place of use.

Overview BAS 130

This is a mobile maсhine for the production of foam concrete, which should be paid attention to both developers and construction organizations. BAS 130 allows to fill walls, floors, roofs. Filling of prepared building voids. Manufacturing blocks of foam concrete (CLC blocks and CLC bricks) and polystyrene concrete of various sizes, density and purpose.

Equipment for foam concrete BAS 130 is universal and allows to receive foam concrete, polystyrene concrete and other materials on the basis of a concrete mix. Mixer promote efficient mixing of concrete mass, intensive air entrainment and even distribution of all components to obtain a homogeneous mixture. Equipment BAS 130 creates excessive internal pressure with the help of a air compressor with a capacity of 200 liters / min with a receiver of 30 liters and feeding the mixture to the equipment site by means of compressed air. The air compressor is purchased separately.

This equipment belongs to mobile stations for manufacturing and supplying foam concrete, foam-polystyrene concrete and foam concrete mixes, for use directly on construction sites. Can work both permanently and mobile. To date, this installation is an indispensable thing in the construction of cottages, holiday homes, garages. It can also be used for the production of CLC blocks and foam concrete with a density of 200 to 900 kg / m3.

Video about BAS 130

Feauteres of Foam concrete CLC mixer BAS 130

The peculiarity of BAS 130 is that it is produced not only for power supply from the 380v network but also from the 220v. This makes it possible to work in any remote locations that are not equipped with industrial power supply networks. The maximum width of BAS 130 is 950mm. Such a small size and the presence of the wheel set allow free movement in already constructed buildings (for the production of screeds and other works).

Light weight and dimensions allow it to be transported in a trailer of a car like pick-up, which minimizes transportation costs. This equipment for the production of foam concrete is made in such a way that there is practically nothing to break. The only consumable in it is the graphite grease, which is sold in any technical store. Low cost of this equipment allows to reduce commercial risk of its operation to a minimum.

Performance BAS 130

Volume of one batch/operation
Duration of one batch/operation
5 min.
Performance per hour
Performance per shift work
Performance in 2 shift works
Performance per day

Specifications BAS 130

140 Kg
Outer dimension (L*W*H)
1260 x 1200 x 950 mm
Loading height
900 mm
Mixing volume per time
0.12 m³
Mixing system pressure
0.6 kg / cm²
Theoretic output (foam concrete)
1 m³ / h
Theoretic output (polystyrene concrete)
1.5 m³ / h
Density of the produced foam concrete
200 - 900 kg / m³
Theoretic delivery distance
15 m
Theoretic delivery height
3 m
Rated voltage
220 v
Mixing motor power
2.2 kW